LiFePO4 Cells  •  Battery Packs  •  DIY Kits  •  Energy Storage Systems

info@deligreen.net   WhatsApp: +86 15074995718

DIY Case 12.8V 628Ah JK RV Lithium battery

The 12V kit, as a substitute for lead-acid batteries, perfectly solves the problems of large volume, low capacity, and few cycles of lead-acid batteries. A car battery pack can be assembled with one kit and four lithium iron batteries.

✓ 51.2V nominal system (demo)
✓ 10kWh usable energy (demo)
✓ Wall-mounted, space-saving format
✓ Smart BMS protection options
✓ Scalable design subject to model configuration

Price: Request Bulk Price

DIY Case 12.8V 628Ah JK RV Lithium battery

The 12V kit, as a substitute for lead-acid batteries, perfectly solves the problems of large volume, low capacity, and few cycles of lead-acid batteries. A car battery pack can be assembled with one kit and four lithium iron batteries.

Price:

Product Introduction

BrandDeligreen
Model12V 4S LFP BOX
ApplicationSolar energy household system
Battery typeEVE MB56 628ah
BMSJK 12V 4S 300A BMS B2A8S30P-HC
Weight10kg
Nominal Voltage12.8V/14.6V
Continuous current300A
MaterialStainless Steel
size390×365×245mm
Suitable batteryEVE

12V lead-acid batteries(AGM) are widely used in RVs, trailers, and trucks as power sources for lighting, water pumps, fans, refrigerators (12V models), air conditioners, and other onboard electrical appliances.Due to its low cost, adaptability to a wide temperature range, simple maintenance, and compatibility with vehicle 12V circuits, it is widely welcomed by car owners and manufacturers.

However, lead-acid batteries have the disadvantages of large volume, low energy density, small capacity, and few cycles. A 12V lithium battery can compensate for these disadvantages. Lithium batteries are increasingly being used in 12V power supplies for RVs and trucks.

Feature12V Lead-Acid Battery12V Lithium Battery (LiFePO₄)
Energy DensityLow (~30-50 Wh/kg)High (~90-160 Wh/kg)
WeightHeavy (e.g., 20-30 kg for 100Ah)Light (e.g., 10-15 kg for 100Ah)
Cycle Life300-500 cycles (50% DoD)2000-5000 cycles (80-90% DoD)
Depth of Discharge (DoD)50% recommended (deep-cycle: 80%)80-100% safe
Charging SpeedSlow (5-8 hours)Fast (1-3 hours, higher charge current)
Efficiency70-85%95-98%
Voltage StabilityDrops under loadStable voltage until depleted
MaintenanceRequires watering (flooded) or AGM sealedMaintenance-free
Temperature TolerancePerformance drops below 0°C or above 40°CWider range (-20°C to 60°C, but may need heating at low temps)
CostLow initial cost ($100-$300 for 100Ah)High initial cost ($400-$1000 for 100Ah)
Lifespan3-5 years8-15 years
SafetyRisk of acid leaks, venting gases (H₂)Safer (no leaks, BMS protection)
Environmental ImpactToxic (lead, acid), recycling requiredCleaner, but recycling infrastructure developing
Common UsesCar/RV starter batteries, backup powerRVs, solar storage, marine, high-performance

JK 300A BMS supports continuous discharge current of 300A.

2A built-in active balancing.

Easy to install. The accessories include PCB brackets, PCB, Fuses, cables, terminals, BMS。 According to the installation manual,

it is very convenient and fast.

 

APPLICATIONS

Designed for Energy Storage Applications

Link each application card to its Solutions page, configuration guide or project inquiry form.

RELATED PRODUCTS

Complete Your Energy Storage System

Use related products to cross-sell compatible batteries, BMS, DIY components, chargers or inverters.

REQUEST A QUOTE

Need a Quote, Sample or Custom Configuration?

Tell us the product model, quantity, destination country and your application. We’ll help match the appropriate product and quote path.

☎+86 15074995718

☎+86 18890081396    
✉ info@deligreen.net
⌖ Room 1418~1422, AUX Building A,
Yuelu area, Changsha, Hunan, China

Get My Quote for This Product

Replace the placeholder sales email before publishing.